Divitec D1 Especificaciones Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 98
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
The camera supports video-type auto iris lenses which adjust to changing
light levels. Perform the following steps to install and adjust a video-type
auto iris lens.
1. If necessary, solder the lens control wires to the connector supplied with
the camera.
2.1.4 VIDEO AUTO IRIS INSTALLATION & ADJUSTMENT
Pin 3
Pin 1
Pin 4
Connector
Cover
Iris Control
Cable
Connector
Automatic
Iris Lens
Heat
Shrinkable
Tubes
Pin 2
Rib
PIN NAME
1 Voltage +
2 Open
3 Video
4 Ground
WIRE COLOR
Red
_
White
Black
2. Attach the video-type auto iris lens to the lens mount on the front of the
camera.
3. IMPORTANT: The minimum Plug the connector from the lens into the
auto iris jack on the back of the camera. The connector is polarized and
can only be inserted into the jack one way.
4. Apply power to the camera.
5. The OSD AE menu in the lens select should be in the “VIDEO ”.
6. Adjust the focus ring on the lens for an optimum picture. If a picture is
not visible, set the lens for proper exposure by adjusting the ALC
(Automatic Level Control) and the level on the lens. The ALC setting
can range between AVG (average) or PK (peak). A midrange setting is
appropriate for most applications.
- 6 -
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 97 98

Comentarios a estos manuales

Sin comentarios